Waiting for a flash tube to fail before you replace it is not always economical. As with all equipment, the output of your flash tubes can change with use and your photos are effected. They should be checked periodically to be certain you are getting the performance you expect from your flash heads. A basic test is to simply take a meter reading with the old flash tube, and again with a new tube installed. If you have access to a flash colour meter, apply the same process. With this information you can decide if the tube is too tired and should be replaced. Spare or replacement flashtube for the Bowens Esprit 1000, Esprit 1000DX, 500Pro or 750Pro Heads