The smallest PocketWizard radio ever, the MiniTT1® Transmitter is part of a new generation of PocketWizard radios providing E-TTL II and power control capabilities with Canon Speedlites and select studio lights. Your creativity also extends far beyond X-Sync speeds with HyperSync™ Automation and FP Sync capabilities.
The MiniTT1™ Transmitter locks onto the camera’s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5™ Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras.
VIDEO:/b> An Introduction to ControlTL and the MiniTT1 Transmitter and FlexTT5 Transceiver - Photographer Mark Wallace walks you through all the basics.
TThe MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL™ System interprets the complex E-TTL II data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the flash compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system corrects for those changes.
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both E-TTL II or manual, with six stops of power adjustment. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds.
Take advantage of PocketWizard’s patent pending HyperSync Automation Technology that allows camera sync well above your standard x-sync limitation with full power flash. HyperSync Automation automatically adjust the timing of your flash trigger so that faster than X-sync speeds can be achieved. With certain Canon camera and flash combinations you can achieve sync all the way to 1/8000th of a second. Just imagine what you can do using flash in bright sun with wide open apertures and fast shutter speeds. Since HyperSync is a trigger function you can use any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX.
With Canon Speedlights you can also use FP/High-Speed Sync mode and shoot at any shutter speed with compatible E-TTLII flashes. With radio wireless, how you can use this amazing feature in bright daylight automatically. No buttons to press or settings to change other than your shutter speed will give you flash sync all the way to 1/8000th.
VIDEO:/b> Mark Wallace explains Optimized High Speed Sync
UUse the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any Paul C. Buff flash.
Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX. Yes, you can intermix i-TTL flash with any manual flash extending your lighting possiblities. /p>
TThe MiniTT1 works on the powerful ControlTL platform and can be configured via the PocketWizard Utility. The PocketWizard Utility is provided to support the MiniTT1 via a USB port. The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware. The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless trigger control./p>