
 |
A clip-on flash supports the
TTL light control system for the latest digital SLR cameras. The flash
can be moved 90° upward, 180° to the left and 120° to the right,
flexibly supporting bounce shooting and other operations. The focal
length display can be switched between the digital display (APS-C) and
the 35-mm film size converted display on the LCD. Numerous functions and
user-friendliness have been combined and condensed in this body.
PZ42X runs on 4-AA
batteries in a compact and light body. The recycle time is
about 3.5 seconds. To realize the maximum Guide Number 42
(ISO100-m) This covers the illumination area with a focal
length of 100 mm (* when converted to 35-mm film size), which is
considered to be most suitable for portrait shooting. (Up to 21 m.)
Compatible with TTL functions of digital SLR cameras.* Note1
Compatible with the advanced flash output control function for Canon
E-TTLII, Nikon i-TTL, Sony ADI. * Note1 : with the exception of some
models. Flexible bounce function The light
emission part can be moved 90° upward, 180° to the left and 120° to the
right, flexibly responding to every possible bounce shooting situation.
EV adjustment function The photographer's intention
can be freely represented by the EV adjustment function up to +/-1.5EV.
* 7 steps (-1.5, -1, -0.5, 0, +0.5, +1, +1.5) can be set. Power
Ratio is available. Equipped with Power Ratio to permit
manually adjusting the flash output. Power Ratio can be set in 7 steps
(FULL,1/2,1/4,1/8,1/16,1/32,1/64). Auto Focus Assist Light
supports focusing in low light situations. When shooting in
the dark or dim places, the near infrared assist light is automatically
illuminated to enable automatic focusing. *Activated only when
focusing on central position.
Switching function of focal length display
The focal length display can be switched between the digital display
(APS-C) and the 35-mm film size converted display. The photographer can
check the focal length display at any time during shooting.
TTL signals are automatically recognized
just by mounting and turning on. The latest high-accuracy
TTL signals are recognized by just mounting this flash on a camera and
turning it on. This flash ensures the accurate, optimum, and
high-quality lighting. Built-in
wide panel Applicable to super-wide-angle lens, more than
20mm focal length. (when converted to 35-mm film size)
Lights up LCD back light by simply
touching button.
|